Table of Contents
Advertisement
Section 1 Overview
Feature
Description
•
8-bit timer,
4 channels
•
•
•
Programmable
timing pattern
•
controller (TPC)
•
•
•
Watchdog
timer (WDT),
•
1 channel
•
•
Serial
communication
•
interface (SCI),
•
3 channels
•
•
A/D converter
•
•
•
•
•
•
D/A converter
•
•
•
I/O ports
•
Rev. 4.00 Jan 26, 2006 page 4 of 938
REJ09B0276-0400
8-bit up-counter (external event count capability)
Two time constant registers
Two channels can be connected
Maximum 16-bit pulse output, using 16-bit timer as time base
Up to four 4-bit pulse output groups (or one 16-bit group, or two 8-bit groups)
Non-overlap mode available
Output data can be transferred by DMAC
Reset signal can be generated by overflow
Reset signal can be output externally (not in the F-ZTAT version)
Usable as an interval timer
Selection of asynchronous or synchronous mode
Full duplex: can transmit and receive simultaneously
On-chip baud-rate generator
Smart card interface functions added
Resolution: 10 bits
Eight channels, with selection of single or scan mode
Variable analog conversion voltage range
Sample-and-hold function
A/D conversion can be started by an external trigger or 8-bit timer compare-
match
DMAC can be activated by an A/D conversion end interrupt
Resolution: 8 bits
Two channels
D/A outputs can be sustained in software standby mode
70 input/output pins
9 input-only pins
Advertisement
Table of Contents
