8.1
Overview
The H8/3067 Group has 11 input/output ports (ports 1, 2, 3, 4, 5, 6, 7, 8, 9, A, and B). Table 8.1
summarizes the port functions. The pins in each port are multiplexed as shown in table 8.1.
Each port has a data direction register (DDR) for selecting input or output, and a data register
(DR) for storing output data. In addition to these registers, ports 2, 4, and 5 have an input pull-up
control register (PCR) for switching input pull-up transistors on and off.
Ports 1 to 6 and port 8 can drive one TTL load and a 90-pF capacitive load. Ports 9, A, and B can
drive one TTL load and a 30-pF capacitive load. Ports 1 to 6 and 8 to B can drive a darlington
pair. Ports 1, 2, and 5 can drive LEDs (with 10-mA current sink). Pins P8
Schmitt-trigger input circuits.
For block diagrams of the ports see appendix C, I/O Port Block Diagrams.
Section 8 I/O Ports
Section 8 I/O Ports
to P8
2
Rev. 4.00 Jan 26, 2006 page 269 of 938
, PA
to PA
have
0
7
0
REJ09B0276-0400