Renesas H8/3067 Series User Manual page 638

Section 18 ROM
Bit 3—Erase-Verify (EV) *
SWE, ESU, PSU, PV, E, or P bit at the same time.
Bit 3:
EV Description
0 Erase-verify mode cleared
1 Transition to erase-verify mode
[Setting condition]
When FWE = 1, and SWE = 1
Bit 2—Program-Verify (PV) *
the SWE, ESU, PSU, EV, E, or P bit at the same time.
Bit 2:
PV Description
0 Program-verify mode cleared
1 Transition to program-verify mode
[Setting condition]
When FWE = 1, and SWE = 1
Bit 1—Erase (E) * *
1
EV, PV, or P bit at the same time.
Bit 1:
E Description
0 Erase mode cleared
1 Transition to erase mode
[Setting condition]
When FWE = 1, SWE = 1, and ESU = 1
Rev. 4.00 Jan 26, 2006 page 614 of 938
REJ09B0276-0400
1
: Selects erase-verify mode transition or clearing. Do not set the
1
: Selects program-verify mode transition or clearing. Do not set
3
: Selects erase mode transition or clearing. Do not set the SWE, ESU, PSU,
(Initial value)
(Initial value)
(Initial value)