Renesas H8/3067 Series User Manual page 124

Section 5 Interrupt Controller
Bit 7—Priority Level B7 (IPRB7): Selects the priority level of 8-bit timer channel 0, 1 interrupt
requests.
Bit 7
IPRB7 Description
0 8-bit timer channel 0, 1 interrupt requests have priority level 0 (low priority)(Initial value)
1 8-bit timer channel 0, 1 interrupt requests have priority level 1 (high priority)
Bit 6—Priority Level B6 (IPRB6): Selects the priority level of 8-bit timer channel 2, 3 interrupt
requests.
Bit 6
IPRB6 Description
0 8-bit timer channel 2, 3 interrupt requests have priority level 0 (low priority)(Initial value)
1 8-bit timer channel 2, 3 interrupt requests have priority level 1 (high priority)
Bit 5—Priority Level B5 (IPRB5): Selects the priority level of DMAC interrupt requests
(channels 0 and 1).
Bit 5
IPRB5 Description
0 DMAC interrupt requests (channels 0 and 1) have priority level 0
(low priority)
1 DMAC interrupt requests (channels 0 and 1) have priority level 1 (high priority)
Bit 4—Reserved: This bit can be written and read, but it does not affect interrupt priority.
Bit 3—Priority Level B3 (IPRB3): Selects the priority level of SCI channel 0 interrupt requests.
Bit 3
IPRB3 Description
0 SCI0 interrupt requests have priority level 0 (low priority)
1 SCI0 interrupt requests have priority level 1 (high priority)
Rev. 4.00 Jan 26, 2006 page 100 of 938
REJ09B0276-0400
(Initial value)
(Initial value)