Show Cli; Show History - Allied Telesis SwitchBlade x908 Series Software Reference Manual

CLI Navigation Commands

show cli

Use this command to display the CLI tree of the current mode.
Syntax show cli
All command modes
Mode
To display the CLI tree of the current mode, use the command:
Example
Figure 4-2: Example output from the show cli command
Output

show history

This command lists the commands entered in the current session. The history buffer is cleared
automatically upon reboot.
The output lists all command line entries, including commands that returned an error.
Syntax
show history
Exec mode and Privileged Exec mode
Mode
To display the commands entered during the current session, use the command:
Example
Figure 4-3: Example output from the show history command
Output
4.6
awplus#
+-ospf
+-A.B.C.D
+-authentication [no ip ospf (A.B.C.D|) authentication]
+-authentication-key [no ip ospf (A.B.C.D|) authentication-
key]
+-cost [no ip ospf (A.B.C.D|) cost]
+-database-filter [no ip ospf (A.B.C.D|) database-filter]
+-hello-interval [no ip ospf (A.B.C.D|) hello-interval]
+-message-digest-key
awplus#
1 en
2 show ru
3 con t
4 route-map er deny 3
5 exit
6 ex
7 di
Software Reference for SwitchBlade® x908, x900 and x600 Series Switches
TM
AlliedWare Plus Operating System - Software Version 5.3.1
show cli
show history
C613-50007-01 REV B