Default Log Host - Allied Telesis SwitchBlade x908 Series Software Reference Manual

default log host

Restores the default settings for log sent to a remote syslog server. By default no filters are
defined for remote syslog servers. Filters must be defined before messages will be sent. Also
restores the remote syslog server time offset value to local (no offset).
Syntax
default log host <ip-address>
Parameter
default
log
host
<ip-address>
Global Configuration mode
Mode
To restore the default settings for messages sent to the remote syslog server with IP address
Examples
10.32.16.21 use the command:
show log config
Validation
Commands
log email
Related Commands
C613-50007-01 REV B
Description
Restore default settings
Logging control
Send log messages to a remote syslog server
The IP address of a remote syslog server, entered in the form A.B.C.D
awplus(config)# default log host 10.32.16.21
Software Reference for SwitchBlade® x908, x900 and x600 Series Switches
TM
AlliedWare Plus Operating System - Software Version 5.3.1
Logging Commands
10.7