Neighbor Interface - Allied Telesis SwitchBlade x908 Series Software Reference Manual

BGP Commands

neighbor interface

Use this command to configure the interface name of a BGP-speaking neighbor.
Use the no parameter with this command to disable this function
Syntax
neighbor <ipaddr> interface <ifname>
no neighbor <ipaddr> interface <ifname>
Parameter
<ipaddr>
<ifname>
Router mode
Mode
Example
awplus(config-router)#
awplus(config-router)#
38.70
Description
Specifies the IPv4 address of the BGP neighbor - entered in dotted decimal
notation.
Specifies the interface name of BGP neighbor.
awplus# configure terminal
awplus(config)# router bgp 10
neighbor 10.10.0.72 interface myinterface
awplus# configure terminal
awplus(config)# router bgp 10
no neighbor 10.10.0.72 interface myinterface
Software Reference for SwitchBlade® x908, x900 and x600 Series Switches
TM
AlliedWare Plus Operating System - Software Version 5.3.1 C613-50007-01 REV B