System Territory; Terminal Monitor - Allied Telesis SwitchBlade x908 Series Software Reference Manual

System Configuration and Monitoring Commands

system territory

This command sets the territory of the system.
Use the no parameter to return the territory to its default setting of japan.
Syntax
system territory {australia|nz|europe|japan|usa|china|korea}
no system territory
Parameter
system
territory
australia
nz
europe
japan
usa
china
korea
Global Configuration mode
Mode
Example
show system
Validation
Commands

terminal monitor

Use this command to display debugging output on a terminal.
To display the cursor after a line of debugging output, press the Enter key.
Use the command terminal no monitor to stop displaying debugging output on the
terminal
Syntax
terminal monitor
terminal no monitor
Privileged Exec mode
Mode
Example
All debug commands
Related Commands
8.40
Description
System properties
Territory of system
Australia
New Zealand
Europe
Japan
USA
China
Korea
awplus(config)# system territory usa
awplus# terminal monitor
Software Reference for SwitchBlade® x908, x900 and x600 Series Switches
TM
AlliedWare Plus Operating System - Software Version 5.3.1 C613-50007-01 REV B