Logging Commands
log console
Configures the device to send log messages to consoles. The console log is configured by
default to send messages to the devices main console port.
Use the no version of this command to configure the device not to send log messages to
consoles.
Syntax
log console
no log console
Parameter
log
console
Global Configuration mode
Mode
To configure the device to send log messages use the command:
Examples
awplus(config)#
To configure the device not to send log messages in all consoles use the command:
awplus(config)#
show log config
Validation
Commands
log console (filter)
Related Commands
10.14
Description
Logging control
Copy debug output to all consoles
log console
no log console
Software Reference for SwitchBlade® x908, x900 and x600 Series Switches
TM
AlliedWare Plus
Operating System - Software Version 5.3.1
C613-50007-01 REV B