File Management Commands
show running-config route-map
show running-config route-mapCommand
Use this command to show the running system status and configuration details for route-map.
For information on output options, see
Syntax
show running-config route-map
Privileged Exec mode and Global Configuration mode
Mode
Example
Figure 7-23: Example output from the show running-config route-map command
Output
copy running-config
Related Commands
show running-config
7.38
New
vs_531
%flag
awplus#
show running-config route-map
!
route-map abc deny 2
match community 2
!
route-map abc permit 3
match route-type external type-2
set metric-type type-1
!
Software Reference for SwitchBlade® x908, x900 and x600 Series Switches
TM
AlliedWare Plus
Operating System - Software Version 5.3.1
File Management Commands
Use this command to show the running system status and configuration details for route-map.
"Controlling "show" command output" on page
1.30.
C613-50007-01 REV B