Show Spanning-Tree Mst Detail Interface - Allied Telesis SwitchBlade x908 Series Software Reference Manual

show spanning-tree mst detail interface

This command prints detailed information about the specified switch port, and the MST
instances associated with it.
Syntax
show spanning-tree mst detail interface <port>
Parameter
<port>
Exec mode and Privileged Exec mode and Interface mode
Mode
The following is an output of this command displaying detailed information about port1.1.3 and
Example
the instances associated with it.
awplus#sh spanning-tree mst detail int port1.0.2
% 1: Bridge up - Spanning Tree Enabled
% 1: CIST Root Path Cost 0 - CIST Root Port 0 -
% 1: Forward Delay 15 - Hello Time 2 - Max Age 20 - Max-hops 20
% 1: CIST Root Id 80000000cd24ff2d
% 1: CIST Reg Root Id 80000000cd24ff2d
% 1: CIST Bridge Id 80000000cd24ff2d
% 1: portfast bpdu-filter disabled
% 1: portfast bpdu-guard disabled
% 1: portfast errdisable timeout disabled
% 1: portfast errdisable timeout interval 300 sec
% port1.0.2: Port 5002 - Id 838a - Role Disabled - State Discarding
% port1.0.2: Designated External Path Cost 0 -Internal Path Cost 0
% port1.0.2: Configured Path Cost 20000000
% port1.0.2: Designated Port Id 838a - CIST Priority 128
% port1.0.2: CIST Root 80000000cd24ff2d
% port1.0.2: Regional Root 80000000cd24ff2d
% port1.0.2: Designated Bridge 80000000cd24ff2d
% port1.0.2: Message Age 0 - Max Age 20
% port1.0.2: CIST Hello Time 2 - Forward Delay 15
% port1.0.2: CIST Forward Timer 0 - Msg Age Timer 0 - Hello Timer 0 - topo change
timer 0
% port1.0.2: forward-transitions 0
% port1.0.2: Version Multiple Spanning Tree Protocol - Received None - Send STP
% port1.0.2: No portfast configured - Current
% port1.0.2: portfast bpdu-guard
% port1.0.2: portfast bpdu-filter default
% port1.0.2: no root guard configured
% port1.0.2: Configured Link Type point-to-point - Current
%
% Instance 2: Vlans: 2
% 1: MSTI Root Path Cost 0 -MSTI Root Port 0 - MSTI Bridge Priority 32768
% 1: MSTI Root Id 80020000cd24ff2d
% 1: MSTI Bridge Id 80020000cd24ff2d
% port1.0.2: Port 5002 - Id 838a - Role Disabled - State Discarding
% port1.0.2: Designated Internal Path Cost 0
% port1.0.2: Configured Internal Path Cost 20000000
% port1.0.2: Configured CST External Path cost 20000000
% port1.0.2: CST Priority 128
% port1.0.2: Designated Root 80020000cd24ff2d
% port1.0.2: Designated Bridge 80020000cd24ff2d
% port1.0.2: Message Age 0 - Max Age 0
% port1.0.2: Hello Time 2 - Forward Delay 15
% port1.0.2: Forward Timer 0 - Msg Age Timer 0 - Hello Timer 0
awplus#
C613-50007-01 REV B
Description
The port to display information about. The port may be a switch port (e.g.,
port1.1.4), a static channel group (e.g., sa3), or an LACP channel group
(e.g., po4).
default
- MSTI Priority 128
Software Reference for SwitchBlade® x908, x900 and x600 Series Switches
TM
AlliedWare Plus Operating System - Software Version 5.3.1
CIST Bridge Priority 32768
- Add type Explicit ref count 2
-
portfast off
- Current portfast bpdu-guard off
- Current portfast bpdu-filter off
- Current root guard off
shared
- Designated Port Id 838a
Spanning Tree Commands
19.19