Debug Ospf Nfsm - Allied Telesis SwitchBlade x908 Series Software Reference Manual

debug ospf nfsm

This command enables debugging options for OSPF Neighbor Finite State Machines (NFSMs).
To enable all debugging options, specify debug ospf nfsm with no additional parameters.
The no and undebug form disables OSPF NFSM debugging. Use this command without
parameters to disable all the options.
Syntax
debug ospf nfsm [events] [status] [timers]
no debug ospf nfsm [events] [status] [timers]
undebug ospf nfsm [events] [status] [timers]
Parameter
events
status
timers
Privileged Exec mode Global Configuration mode
Mode
Examples
terminal monitor
Related Commands
C613-50007-01 REV B
Description
Displays NFSM event information.
Displays NSFM status information.
Displays NFSM timer information.
awplus# debug ospf nfsm events
awplus# no debug ospf nfsm timers
awplus# undebug ospf nfsm events
Software Reference for SwitchBlade® x908, x900 and x600 Series Switches
TM
AlliedWare Plus Operating System - Software Version 5.3.1
OSPF Commands
36.19