Show Platform Table Port - Allied Telesis SwitchBlade x908 Series Software Reference Manual

show platform table port

This command displays the various port registers for specified ports.
Syntax show platform table port [<port-list>|counters]
Parameter
show
platform
table
port
<port-list>
counters
Exec and Privileged Exec mode
Mode
To display table counters for port1.0.1 and port1.0.2 use the command:
Examples
See the below sample output from this command.
Output
C613-50007-01 REV B
Description
show the platform table
show the platform table
show the platform table
show the ports
The ports to display information about. A port-list can be:
a switch port (e.g. port1.2.12) a static channel group (e.g., sa3) or a
■
dynamic (LACP) channel group (e.g., po3)
a continuous range of ports separated by a hyphen,
■
e.g., port1.0.1-1.0.24 or port1.1.1-port1.1.24 or po1-po4
a comma-separated list of ports and port ranges,
■
e.g. port1.0.1,port1.1.1-1.2.24. Do not mix switch ports, static channel
groups, and LACP channel groups in the same list.
show the platform counters
awplus# show platform table port port1.0.1-
port1.0.2
Software Reference for SwitchBlade® x908, x900 and x600 Series Switches
TM
AlliedWare Plus Operating System - Software Version 5.3.1
Switching Commands
15.33