Show Ipv6 Rip Database - Allied Telesis SwitchBlade x908 Series Software Reference Manual

show ipv6 rip database

show ipv6 rip database Command
Use this command to display information about the RIPng database.
To modify the lines displayed, use the | (output modifier token); to save the output to a file
use the > output redirection token.
Syntax
show ipv6 rip database
Privileged Exec mode and Exec mode
Mode
Example
The following is a sample output from the show ipv6 rip database command:
Usage
show ipv6 rip
Related Commands
C613-50007-01 REV B
New vs_531 %flag
awplus# show ipv6 rip database
Codes: R - RIP, Rc - RIP connected, Rs - RIP static, Ra - RIP
aggregated, Rcx - RIP connect suppressed, Rsx - RIP static
suppressed, C - Connected, S - Static, O - OSPF, B - BGP
Network
R 3ffe:1234:5678::/64 fe80::3 vlan3 3 0 02:28
C 3ffe:ffff:1::/64 :: vlan2 0
Ra 3ffe:ffff:2::/48 -- 1 0
Rs 3ffe:ffff:2::/48 fe80::3 vlan3 3 0 02:32
Cs 3ffe:ffff:2::/64 :: VLAN1 1 0
R 3ffe:ffff:ffff:ffff::/64 fe80::3 vlan3 3 0 02:28
Software Reference for SwitchBlade® x908, x900 and x600 Series Switches
TM
AlliedWare Plus Operating System - Software Version 5.3.1
RIPng Commands Use this command to display information about the RIPng database.
Next Hop
RIPng Commands
If Met Tag Time
34.17