Show Flowcontrol Interface - Allied Telesis SwitchBlade x908 Series Software Reference Manual

Switching Commands

show flowcontrol interface

Use this command to display flow control information.
Syntax show flowcontrol interface <ifname>
Parameter
<ifname>
Exec and Privileged Exec mode
Mode
Figure 15-1: Example output from the show flowcontrol interface command for a specific
Output
interface
To display the flow control for the port1.1.5, use the command:
Example
15.24
Description
Specifies the name of the interface to be displayed.
Port Send FlowControl
admin oper
----- ------- --------
port1.1.5 on on
awplus# show flowcontrol interface port1.1.5
Software Reference for SwitchBlade® x908, x900 and x600 Series Switches
TM
AlliedWare Plus Operating System - Software Version 5.3.1
Receive FlowControl
admin oper
------- --------
on on
RxPause TxPause
------- -------
0 0
C613-50007-01 REV B