Debug Ospf Route - Allied Telesis SwitchBlade x908 Series Software Reference Manual

OSPF Commands

debug ospf route

This command enables debugging of route calculation. Use this command without parameters
to turn on all the options.
To enable all debugging options, specify debug ospf routet with no additional parameters.
The no and undebug form disables OSPF route debugging. Use this command without
parameters to disable all options.
Syntax
debug ospf route [ase] [ia] [install] [spf]
no debug ospf route [ase] [ia] [install] [spf]
undebug ospf route [ase] [ia] [install] [spf]
Parameter
ia
ase
install
spf
Privileged Exec mode and Global Configuration mode
Mode
Examples
terminal monitor
Related Commands
36.22
Description
Specifies the debugging of Inter-Area route calculation
Specifies the debugging of external route calculation
Specifies the debugging of route installation
Specifies the debugging of SPF calculation
awplus# debug ospf route
awplus# no debug ospf route ia
awplus# debug ospf route install
awplus# undebug ospf route install
Software Reference for SwitchBlade® x908, x900 and x600 Series Switches
TM
AlliedWare Plus Operating System - Software Version 5.3.1 C613-50007-01 REV B