Show Ip Ospf Neighbor - Allied Telesis SwitchBlade x908 Series Software Reference Manual

OSPF Commands

show ip ospf neighbor

Use this command to display information on OSPF neighbors. Include the process ID
parameter with this command to display information about specified instances.
To modify the lines displayed, use the | (output modifier token) ; to save the output to a file,
use the > output redirection token.
Syntax
show ip ospf [<ospf-id>] neighbor <ip-address> [detail]
show ip ospf [<ospf-id>] neighbor detail [all]
show ip ospf [<ospf-id>] neighbor [all]
show ip ospf [<ospf-id>] neighbor interface
Parameter
<ospf-id>
<ip-address>
all
detail
interface
<ip-address>
Exec mode and Privileged Exec mode
Mode
Examples
awplus#
awplus#
awplus#
Figure 36-19: Example output from the
Output
OSPF process 1:
Neighbor ID Pri
10.10.10.50
OSPF process 100:
Neighbor ID Pri
10.10.11.50
awplus#show ip ospf 1 neighbor
OSPF process 1:
Neighbor ID Pri
10.10.10.50
Figure 36-20: Example output from the
OSPF process 100:
Neighbor ID Pri
10.10.11.50
36.74
Description
<0-65535> The ID of the router process for which information will be
displayed.
The Neighbor ID, entered in the format A.B.C.D.
Include downstatus neighbor
Detail of all neighbors
Address of the interface, entered in the forma A.B.C.D
show ip ospf neighbor detail
show ip ospf neighbor 1.2.3.4
show ip ospf neighbor interface
10.10.10.50 detail all
State
1 Full/DR
State
1 Full/Backup
State
1 Full/DR
State
1 Full/Backup
Software Reference for SwitchBlade® x908, x900 and x600 Series Switches
TM
AlliedWare Plus Operating System - Software Version 5.3.1
show ip ospf neighbor
Dead Time Address
00:00:38 10.10.10.50
Dead Time Address
00:00:31 10.10.11.50
Dead Time Address
00:00:38 10.10.10.50
show ip ospf <ospf-id> neighbor
Dead Time Address
00:00:31 10.10.11.50
<ip-address>
command
Interface
VLAN1
Interface
VLAN2
Interface
VLAN1
command
Interface
VLAN2
C613-50007-01 REV B