Restart Ospf Graceful; Router Ospf - Allied Telesis SwitchBlade x908 Series Software Reference Manual

OSPF Commands

restart ospf graceful

Use this command to force the OSPF process to restart.
Syntax
restart ospf graceful [grace-period <1-1800>]
Privileged Exec mode
Mode
After this command is executed, the OSPF process immediately shuts down. It notifies the
Usage
system that OSPF has performed a graceful shutdown. Routes installed by OSPF are preserved
until the grace-period expires.
■
Examples

router ospf

Use this command to enter router mode and to configure an OSPF routing process. You must
specify the process ID with this command for multiple OSPF routing processes on the switch.
Use the no parameter with this command to terminate an OSPF routing process. Use the no
parameter with the process ID parameter, to terminate and delete a specific OSPF routing
process. If no process ID is specified on the no command, then all OSPF routing processes are
terminated, and all OSPF configuration is removed.
Syntax
router ospf <process-id>
no router ospf [<process-id>]
Parameter
<process-id>
No routing process defined by default.
Default
Global Configuration mode
Mode
The process ID of OSPF is an optional parameter for the no router ospf command only.
Usage
When removing all instances of OSPF, you do not need to specify each Process ID, but when
removing particular instances of OSPF you must specify each Process ID to be removed.
This example shows the use of router ospf command to enter router mode.
Examples
awplus(config-router)#
36.54
When a restart ospf graceful command is issued, the OSPF configuration is reloaded
from the last saved configuration. Ensure you first issue the command
config startup-config.
awplus#
awplus#
Description
<1-65535> Any positive integer identifying a routing process.
awplus#
awplus(config)#
Software Reference for SwitchBlade® x908, x900 and x600 Series Switches
TM
AlliedWare Plus Operating System - Software Version 5.3.1
copy running-config startup-config
restart ospf graceful grace-period 200
configure terminal
router ospf 100
copy running-
C613-50007-01 REV B