VLAN Commands
vlan database
Use this command to enter the VLAN configuration mode.
Syntax
vlan database
Global Configuration mode
Mode
Use this command to enter the VLAN configuration mode. You can then add or delete a
Usage
VLAN, or modify its values.
In the following example, note the change to VLAN configuration mode from Configure mode:
Examples
vlan
Related Commands
17.24
awplus#
awplus(config)#
awplus(config-vlan)#
Software Reference for SwitchBlade® x908, x900 and x600 Series Switches
TM
AlliedWare Plus
Operating System - Software Version 5.3.1
configure terminal
vlan database
C613-50007-01 REV B