If the static route becomes unavailable, then the device automatically selects the OSPF route
and installs it in the FIB.
To display the static routes in the RIB, use the command:
Examples
maximum-paths
Related Commands
show ip route
show ip route summary
This command displays a summary of the current RIB entries.
To modify the lines displayed, use the | (output modifier token); to save the output to a file,
use the > output redirection token.
Syntax
show ip route summary
Exec mode and Privileged Exec mode
Mode
Figure 30-3: Example output from the
Output
To display a summary of the current RIB entries, use the command:
Examples
show ip route
Related Commands
show ip route database
C613-50007-01 REV B
awplus#
IP routing table name is Default-IP-Routing-Table(0)
IP routing table maximum-paths is 4
Route Source
Networks
connected
5
ospf
2
Total
8
FIB
2
awplus#
show ip route summary
Software Reference for SwitchBlade® x908, x900 and x600 Series Switches
TM
AlliedWare Plus
Operating System - Software Version 5.3.1
show ip route database static
show ip route summary
Routing Commands
command
30.7