Show Ip Bgp Cidr-Only - Allied Telesis SwitchBlade x908 Series Software Reference Manual

show ip bgp cidr-only

Use this command to display routes with non-natural network masks.
Syntax show ip bgp cidr-only
show ip bgp <prefix> cidr-only
Parameter
<prefix>
unicast
multicast
Privileged Exec mode and Exec mode
Mode
Example
This is a sample output from the show ip bgp cidr-only command
Output
Figure 38-4: Example output from the show ip bgp cidr-only command
C613-50007-01 REV B
Description
{multicast|unicast}
Specifies a IPv4 unicast address family. This is the default option.
Configures parameters relating to the BGP exchange of routes to unicast
destinations.
Specifies a IPv4 multicast address family. Configures parameters relating to
the BGP exchange of routes to source addresses of multicast streams.
awplus# show ip bgp cidr-only
BGP table version is 0, local router ID is 10.10.10.50
Status codes: s suppressed, d damped, h history, p stale, *
valid, > best, i - internal
Origin codes: i - IGP, e - EGP, ? - incomplete
Network
*> 3.3.3.0/24
*> 6.6.6.0/24
Total number of prefixes 2
Software Reference for SwitchBlade® x908, x900 and x600 Series Switches
TM
AlliedWare Plus Operating System - Software Version 5.3.1
Next Hop Metric LocPrf Weight Path
10.10.10.10
0.0.0.0
BGP Commands
0 11 i
32768 i
38.105