How to see the current configuration
The current configuration is called the running-config. To see it, enter the following command
in either Privileged Exec mode or any configuration mode:
To see only part of the current configuration, enter the command:
This displays only the lines that contain word.
To start the display at a particular place, enter the command:
This searches the running-config for the first instance of word and begins the display with that
line.
Note:
C613-50007-01 REV B
awplus#
show running-config
awplus#
show running-config|include <word>
awplus#
show running-config |begin <word>
The show running-config command works in all modes except User Exec mode.
Software Reference for SwitchBlade® x908, x900 and x600 Series Switches
TM
AlliedWare Plus
Operating System - Software Version 5.3.1
Getting Started
1.13