Restart Rip Graceful; Rip Restart Grace-Period - Allied Telesis SwitchBlade x908 Series Software Reference Manual

RIP Commands

restart rip graceful

Use this command to force the RIP process to restart.
Syntax restart rip graceful [grace-period <1-65535>]
Privileged Exec mode
Mode
After this command is executed, the RIP process immediately shuts down. It notifies the system
Usage
that RIP has performed a graceful shutdown. Routes that have been installed into the route
table by RIP are preserved until the specified grace-period expires.
■
Example
awplus#
awplus#

rip restart grace-period

Use this command to change the grace period of RIP graceful restart.
Use the no parameter with this command to disable this function.
Syntax
rip restart grace-period <1-65535>
no rip restart grace-period <1-65535>
Global Configuration mode
Mode
Use this command to enable the Graceful Restart feature on the RIP process. Entering this
Usage
command configures a grace period for RIP.
Example
awplus(config)#
32.28
When a restart rip graceful command is issued, the RIP configuration is reloaded from
the last saved configuration. Ensure you first issue the command
startup-config.
copy running-config startup-config
restart rip graceful grace-period 100
awplus# configure terminal
rip restart grace-period 200
Software Reference for SwitchBlade® x908, x900 and x600 Series Switches
TM
AlliedWare Plus Operating System - Software Version 5.3.1
copy running-config
C613-50007-01 REV B