Ip Irdp - Allied Telesis SwitchBlade x908 Series Software Reference Manual

ip irdp

This command enables ICMP Router Discovery advertising on an interface. However, the
interface does not send or process Router Discovery messages until at least one IP address is
configured on the interface with the
The no form disables ICMP Router Discovery advertisements on an IP interface. All
transmitting and processing of Router Discovery messages ceases immediately on the interface.
Syntax ip irdp
no ip irdp
Interface mode
Mode
To enable Router Discovery advertisements on vlan4, use the commands:
Examples
awplus(config-if)#
To disable Router Discovery advertisements on vlan4, use the command:
awplus(config-if)#
show ip irdp
Related Commands
show ip irdp
show ip irdp interface
C613-50007-01 REV B
awplus# configure terminal
awplus(config)# interface vlan4
ip irdp
awplus# configure terminal
awplus(config)# interface vlan4
no ip irdp
Software Reference for SwitchBlade® x908, x900 and x600 Series Switches
TM
AlliedWare Plus Operating System - Software Version 5.3.1
ip address command.
IP Addressing and Protocol Commands
23.17