Show Running-Config - Allied Telesis SwitchBlade x908 Series Software Reference Manual

File Management Commands

show running-config

This command displays the current configuration of the device. You can control the output in
any one of the following ways:
■
■
■
For more information, see
Syntax
show running-config
All modes
Mode
Figure 7-6: Example output from the show running-config command
Output
!
service password-encryption
!
username manager privilege 15 password 8 $1$bJoVec4D$JwOJGPr7YqoExA0GVasdE0
!
service telnet
!
no clock timezone
ip domain-lookup
!
spanning-tree mode rstp
no platform e2efc
!
interface port1.0.1-1.0.24
switchport
switchport mode access
!
!
service telnet
!
no clock timezone
ip domain-lookup
!
spanning-tree mode rstp
no platform e2efc
!
interface port1.0.1-1.0.24
switchport
switchport mode access
!
interface VLAN1
ip address 172.28.8.210/16
!
ip route 0.0.0.0/0 172.28.0.1
!
line con 0
line vty 0 4
!
end
To display the current dynamic configuration of your device, use the command:
Examples
copy running-config
Related Commands
show running-config access-list
7.26
To display only lines that contain a particular word, follow the command with
| include word
To start the display at the first line that contains a particular word, follow the command
with | begin word
To save the output to a file, follow the command with
"Controlling "show" command output" on page
awplus#show running-config
Software Reference for SwitchBlade® x908, x900 and x600 Series Switches
TM
AlliedWare Plus Operating System - Software Version 5.3.1
> filename
1.30.
C613-50007-01 REV B