Show Ip Bgp - Allied Telesis SwitchBlade x908 Series Software Reference Manual

show ip bgp

Use this command to display BGP network information.
Syntax show ip bgp [<ipaddr>|<ipaddr/m>]
show ip bgp {<prefix> [<ipaddr>]}
Parameter
<ipaddr>
<ipaddr/m>
<prefix>
unicast
multicast
Privileged Exec mode and Exec mode
Mode
Unicast is the default IPv4 address family.
Default
Example
This is a sample output from the show ip bgp command displaying BGP network
Output
information.
awplus#
Figure 38-2: Example output from the show ip bgp command
C613-50007-01 REV B
Description
Specifies the IPv4 address and optional prefix mask length.
{multicast|unicast}
Specifies a IPv4 unicast address family. This is the default option.
Configures parameters relating to the BGP exchange of routes to unicast
destinations.
Specifies a IPv4 multicast address family. Configures parameters relating to
the BGP exchange of routes to source addresses of multicast streams.
awplus# show ip bgp 10.10.1.34/24
show ip bgp
BGP table version is 7, local router ID is 80.80.80.80
Status codes: s suppressed, d damped, h history, * valid, >
best, i - internal, S Stale
Origin codes: i - IGP, e - EGP, ? - incomplete
Network Next Hop
S>i10.70.0.0/24
S>i30.30.30.30/32
S>i63.63.63.1/32
S>i67.67.67.67/32
S>i172.22.10.0/24
S>i192.10.21.0
S>i192.10.23.0
Total number of prefixes 7
Software Reference for SwitchBlade® x908, x900 and x600 Series Switches
TM
AlliedWare Plus Operating System - Software Version 5.3.1
Metric LocPrf Weight Path
192.10.23.67
192.10.23.67
192.10.23.67
192.10.23.67
192.10.23.67
192.10.23.67
192.10.23.67
BGP Commands
0 100 0 ?
0 100 0 ?
0 100 0 ?
0 100 0 ?
0 100 0 ?
0 100 0 ?
0 100 0 ?
38.103