Show Memory History - Allied Telesis SwitchBlade x908 Series Software Reference Manual

show memory history

This command prints a graph showing the historical memory usage.
If entered on the stack master, this command will display corresponding memory utilization
information for all the stack members. A stack member heading will be displayed to distinguish
the different lists for every stack member.
If it is entered on a specific stack member, as host-directed commands, it will display
corresponding memory utilization information for that stack member.
Syntax show memory history
Exec mode and Privileged Exec mode.
Mode
This command's output displays three graphs of the percentage memory utilization:
Usage
■
■
■
To show a graph displaying the historical memory usage for either a single unstacked device, or
Example
a complete stack, use the command:
To show a graph displaying the historical memory usage for a single device (device 3 in this
example) within a stack, use the command:
C613-50007-01 REV B
per second for the last minute, then
per minute for the last hour, then
per 30 minutes for the last 30 hours.
awplus#
awplus#
Software Reference for SwitchBlade® x908, x900 and x600 Series Switches
TM
AlliedWare Plus Operating System - Software Version 5.3.1
System Configuration and Monitoring Commands
show memory history
remote-command 3 show memory history
8.25