Spanning Tree Commands
revision (MSTP)
Use this command to specify the MST revision number to be used in the configuration
identifier.
Use this command for MSTP only.
Syntax
revision <revision-number>
Parameter
<revision-number>
MST Configuration Mode
Mode
The default value of revision number is 0.
Default
The region name, the revision number, and the digest of the VLAN to MSTI configuration table
Usage
must be the same on all devices that are intended to be in the same MST region.
Examples
awplus(config-mst)#
region (MSTP)
Related Commands
show spanning-tree mst config
instance vlan (MSTP)
19.10
Description
<0-255> Revision number.
awplus#
configure terminal
awplus(config)#
spanning-tree mst configuration
revision 25
Software Reference for SwitchBlade® x908, x900 and x600 Series Switches
TM
AlliedWare Plus
Operating System - Software Version 5.3.1
C613-50007-01 REV B