BGP Commands
neighbor transparent-as
Use this command to specify not to append your AS path number even if the peer is an eBGP
peer.
Syntax
neighbor <neighborid> transparent-as
Parameter
<neighborid>
Router mode
Mode
Example
awplus(config-router)#
38.90
Description
{<ip-address>|<tag>}
<ip-
address>
<tag>
awplus#
configure terminal
awplus(config)#
router bgp 12
neighbor 10.10.10.10 transparent-as
Software Reference for SwitchBlade® x908, x900 and x600 Series Switches
TM
AlliedWare Plus
Operating System - Software Version 5.3.1
The address of an IPv4 BGP neighbor, in dotted decimal
notation A.B.C.D.
Name of an existing peer-group. For information on how
to create peer groups, refer to the
group (adding a neighbor) command on page
38.75, and
neighbor remote-as command on
page
38.79. When this parameter is used with a
command, the command applies on all peers in the
specified group.
neighbor peer-
C613-50007-01 REV B