edit URL
This command opens a remote text file as read-only in the AlliedWare Plus
Before starting the editor make sure your terminal, terminal emulation program, or Telnet
client is 100% compatible with a VT100 terminal. The editor uses VT100 control sequences to
display text on the terminal.
Syntax
edit <url>
Parameter
<url>
Privileged Exec mode
Mode
To view the file bob.key stored in the security directory of a TFTP server, use the command:
Examples
edit
Related Commands
show file
erase startup-config
This command deletes the file that is set as the startup-config file, which is the configuration file
that the system runs when it boots up.
At the next restart, the device loads the default configuration file, default.cfg. If default.cfg no
longer exists, then the device loads with the factory default configuration. This provides a
mechanism for you to return the device to the factory default settings.
Syntax
erase startup-config
Privileged Exec mode
Mode
To delete the file currently set as the startup-config, use the command:
Examples
awplus#erase startup-config
boot backup
Related Commands
boot config-file
copy running-config
copy startup-config
show boot
C613-50007-01 REV B
Description
The URL of the remote file. See
Usage" on page 7.3
awplus#edit tftp://security/bob.key
Software Reference for SwitchBlade® x908, x900 and x600 Series Switches
TM
AlliedWare Plus
Operating System - Software Version 5.3.1
File Management Commands
"URL Syntax and Keyword
for valid URL syntax.
TM
text editor.
7.15