Spanning-Tree Mst Instance - Allied Telesis SwitchBlade x908 Series Software Reference Manual

Spanning Tree Commands

spanning-tree mst instance

Use this command to assign a Multiple Spanning Tree instance (MSTI) to a switch port or
channel group.
Note that ports are automatically configured to send and receive spanning-tree information for
the associated MSTI when VLANs are assigned to MSTIs using the instance vlan command.
You can disable automatic configuration of member ports of a VLAN to an associated MSTI by
using a no spanning-tree mst instance command to remove the member port from the MSTI.
Use the spanning-tree mst instance command to add a VLAN member port back to a MSTI.
Use the no spanning-tree mst instance command to remove the MSTI from this port.
Syntax
spanning-tree mst instance <instance-id>
no spanning-tree mst instance
Parameter
<instance-id>
Interface mode
Mode
Examples
awplus(config-if)#
instance vlan (MSTP)
Related Commands
19.36
Description
<1-15> Specify the instance ID. The instance must have already been
created using the
awplus# configure terminal
awplus(config)# interface port1.1.2
spanning-tree mst instance 3
Software Reference for SwitchBlade® x908, x900 and x600 Series Switches
TM
AlliedWare Plus Operating System - Software Version 5.3.1
instance vlan (MSTP) command.
C613-50007-01 REV B