Commands Available In Each Mode; User Exec Mode - Allied Telesis SwitchBlade x908 Series Software Reference Manual

Getting Started

Commands available in each mode

This appendix lists the commands available in the following command modes for software
Software Version 5.3.1.
■
■
■

User Exec mode

Exec commands:
1.32
"User Exec mode" on page 1.32
"Privileged Exec mode" on page 1.33
"Global Configuration mode" on page 1.34
awplus>
clear Reset functions
debug Debugging functions (see also 'undebug')
disable Turn off privileged mode command
echo Echo a string
enable Turn on privileged mode command
exit End current mode and down to previous mode
help Description of the interactive help system
logout Exit from the EXEC
mstat Show statistics after multiple multicast traceroutes
mtrace Trace multicast path from source to destination
no Negate a command or set its defaults
ping Send echo messages
quit Exit current mode and down to previous mode
remote-command Remote stack member command execution
rmon Debugging functions (see also 'undebug')
show Show running system information
ssh Open an SSH connection
telnet Open a telnet connection
terminal Set terminal line parameters
traceroute Trace route to destination
Software Reference for SwitchBlade® x908, x900 and x600 Series Switches
TM
AlliedWare Plus Operating System - Software Version 5.3.1
?
C613-50007-01 REV B