Debug Bgp - Allied Telesis SwitchBlade x908 Series Software Reference Manual

BGP Commands

debug bgp

Use this command to turn on one or more BGP debug options.
Use the no parameter with this command to disable one or more BGP debug options.
Syntax
debug bgp [all|dampening|events|filters|fsm|keepalives|nsm|<updates>]
no debug all bgp
no debug bgp [all|dampening|events|filters|fsm|keepalives|nsm|
Parameter
all
dampening
events
filters
fsm
keepalives
nsm
<updates>
in
out
Privileged Exec mode
Mode
If the command is entered with no parameters, then all debug options are enabled.
Usage
Example
awplus#
awplus#
show debugging bgp
Related Commands
38.44
<updates>]
Description
Used with the no form exclusively; turns off all debugging for BGP
Specifies debugging for BGP dampening.
Specifies debugging for BGP events.
Specifies debugging for BGP filters.
Specifies debugging for BGP Finite State Machine (FSM).
Specifies debugging for BGP keepalives.
Specifies debugging for NSM messages.
updates [in|out] Specifies debugging for BGP updates.
Inbound updates
Outbound updates
debug bgp
debug bgp events
Software Reference for SwitchBlade® x908, x900 and x600 Series Switches
TM
AlliedWare Plus Operating System - Software Version 5.3.1 C613-50007-01 REV B