Show Ip Bgp View Summary - Allied Telesis SwitchBlade x908 Series Software Reference Manual

BGP Commands

show ip bgp view summary

Use this command to view the summary data of neighbors of the given instance.
Syntax show ip bgp view <instance> summary
show ip bgp view <instance> [<prefix>] summary
Parameter
<instance>
<prefix>
unicast
multicast
Privileged Exec mode and Exec mode
Mode
Example
The following example shows the summary data of instance named I2.
Output
Figure 38-13: Example output from the
awplus#show ip bgp view I2 summary
BGP router identifier 10.10.10.50, local AS number 10
1 BGP AS-PATH entries
0 BGP community entries
Neighbor V AS MsgRcvd MsgSent TblVer
10.10.10.52 4 10
Total number of neighbors 1
show ip bgp neighbors
Related Commands
38.120
Description
the name of the instance to display data for.
{multicast|unicast}
Specifies a IPv4 unicast address family. This is the default option.
Configures parameters relating to the BGP exchange of routes to unicast
destinations.
Specifies a IPv4 multicast address family. Configures parameters relating to
the BGP exchange of routes to source addresses of multicast streams.
awplus# show ip bgp 128 view instance1 neighbor 10.10.10.5
show ip bgp view summary
1 2
Software Reference for SwitchBlade® x908, x900 and x600 Series Switches
TM
AlliedWare Plus Operating System - Software Version 5.3.1
command
InQ OutQ Up/Down State/PfxRcd
0 0 0 00:00:07 5
C613-50007-01 REV B