Ipv6 Forwarding - Allied Telesis SwitchBlade x908 Series Software Reference Manual

ipv6 forwarding

ipv6 forwarding Command
Use this command to turn on IPv6 forwarding.
Use the no parameter with this command to turn off IPv6 forwarding.
Note:
Syntax
ipv6 forwarding
no ipv6 forwarding
Global Configuration mode
Mode
Examples
awplus(config)#
C613-50007-01 REV B
New vs_531 %flag
The switch will not apply any IPv6 functionality unless you have allocated it
memory resource by using the
awplus# configure terminal
ipv6 forwarding
Software Reference for SwitchBlade® x908, x900 and x600 Series Switches
TM
AlliedWare Plus Operating System - Software Version 5.3.1
IPv6 Commands This new command Use this command turns on IPv6 forwarding.
platform routingratio command on page
IPv6 Commands
15.22.
25.3