Undebug Rip - Allied Telesis SwitchBlade x908 Series Software Reference Manual

RIP Commands

undebug rip

Use this command to disable the options set for debugging information of RIP events, packets
and communication between RIP and NSM.
This command has the same effect as the no debug rip command.
Syntax
undebug rip {all|events|nsm|<packet>}
Parameter
all
events
nsm
<packet>
recv
send
detail
Privileged Exec mode
Mode
Example
awplus#
32.36
Description
Disables all RIP debugging.
Disables the logging of RIP events.
Disables the logging of RIP and NSM communication.
packet [recv|send] [detail]
Disables the debugging of RIP packets.
Disables the logging of received packet information.
Disables the logging of sent packet information.
Disables the logging of sent or received RIP packets.
undebug rip packet
Software Reference for SwitchBlade® x908, x900 and x600 Series Switches
TM
AlliedWare Plus Operating System - Software Version 5.3.1 C613-50007-01 REV B