Spanning-Tree Errdisable-Timeout Interval - Allied Telesis SwitchBlade x908 Series Software Reference Manual

spanning-tree errdisable-timeout interval

Use this command to specify the time interval after which a port is brought back up when it has
been disabled by the BPDU guard feature.
Use this command for RSTP or MSTP.
Syntax
spanning-tree errdisable-timeout interval <10-1000000>
no spanning-tree errdisable-timeout interval
Parameter
<10-1000000>
Global Configuration mode
Mode
By default, the port is re-enabled after 300 seconds.
Default
Example
awplus(config)#
show spanning-tree
Related Commands
spanning-tree errdisable-timeout enable
spanning-tree portfast bpdu-guard
C613-50007-01 REV B
Description
Specify the errdisable-timeout interval in seconds.
awplus# configure terminal
spanning-tree errdisable-timeout interval 34
Software Reference for SwitchBlade® x908, x900 and x600 Series Switches
TM
AlliedWare Plus Operating System - Software Version 5.3.1
Spanning Tree Commands
19.27