Bgp Multiple-Instance; Bgp Rfc1771-Path-Select - Allied Telesis SwitchBlade x908 Series Software Reference Manual

BGP Commands

bgp multiple-instance

Use this command to enable or disable the bgp multiple instance support.
Use the no parameter with this command to disable this function.
Syntax
bgp multiple-instance
no bgp multiple-instance
No multiple-instance support
Default
Global Configuration mode
Mode
Example
awplus(config)#

bgp rfc1771-path-select

Use this command to set RFC1771 compatible path selection mechanism.
Use the no parameter with this command to revert this setting.
Syntax
bgp rfc1771-path-select
no bgp rfc1771-path-select
Industry standard compatible path selection mechanism.
Default
Global Configuration mode
Mode
Example
awplus(config)#
38.26
awplus# configure terminal
bgp multiple-instance
awplus# configure terminal
bgp rfc1771-path-select
Software Reference for SwitchBlade® x908, x900 and x600 Series Switches
TM
AlliedWare Plus Operating System - Software Version 5.3.1 C613-50007-01 REV B