OSPF Commands
capability restart
This command enables OSPF graceful restart or restart signaling features. By default, this is
enabled.
The no form of this command to disables OSPF graceful restart and restart signalling features.
Syntax
capability restart [graceful|signaling]
no capability restart
Parameter
graceful
signaling
Router mode
Mode
Examples
awplus(config-router)#
clear ip ospf process
This command clears and restarts the OSPF routing process. Specify the Process ID to clear
one particular OSPF process. When no Process ID is specified, this command clears all running
OSPF processes.
Syntax
clear ip ospf [<0-65535>] process
Parameter
<0-65535>
Privileged Exec Mode
Mode
Examples
36.14
Description
Specify enabling OSPF graceful restart feature. Default.
Specify enabling OSPF signaling restart feature.
awplus#
configure terminal
awplus(config)#
router ospf 100
capability restart graceful
Description
The Routing Process ID.
awplus#
clear ip ospf process
Software Reference for SwitchBlade® x908, x900 and x600 Series Switches
TM
AlliedWare Plus
Operating System - Software Version 5.3.1
C613-50007-01 REV B