Route (Ipv) - Allied Telesis SwitchBlade x908 Series Software Reference Manual

route (IPv6)
route (IPv6) Command
Use this command to configure static RIPng routes.
Use the no parameter with this command to disable this function.
Syntax route <ipv6-addr/prefix-length>
no route <ipv6-addr/prefix-length>
Parameter
<ipv6-addr/prefix-length>
Router mode
Mode
Use this command to add a static RIPng route. After adding the RIPng route, the route can be
Usage
checked in the RIPng routing table.
Example
awplus(config-router)#
show ipv6 rip
Related Commands
clear ipv6 rip route
C613-50007-01 REV B
New vs_531 %flag
awplus# configure terminal
awplus(config)# router ipv6 rip
route 3ffe:1234:5678::1/64
Software Reference for SwitchBlade® x908, x900 and x600 Series Switches
TM
AlliedWare Plus Operating System - Software Version 5.3.1
RIPng Commands Use this command to configure static RIPng routes.
Description
Specify the IPv6 Address in format X:X::X:X/Prefix-Length.
The prefix-length is a decimal integer between 1 and 128.
RIPng Commands
34.13