Debug Nsm; Debug Nsm Packet - Allied Telesis SwitchBlade x908 Series Software Reference Manual

System Configuration and Monitoring Commands

debug nsm

This command specifies a set of debug options for use by Allied Telesis authorized service
personnel only. Use this command to specify the debug options set for the routing manager.
Syntax
debug nsm [all|events]
no debug nsm [all|events]
Privileged Exec mode and Global Configuration mode
Mode
show debugging nsm
Related Commands

debug nsm packet

This command specifies a set of debug options for use by Allied Telesis authorized service
personnel only. Use this command to specify the debug options for the nsm packet.
Syntax
debug nsm packet [recv|send][detail]
no debug nsm packet
Privileged Exec mode and Global Configuration mode
Mode
show debugging nsm
Related Commands
8.10
Software Reference for SwitchBlade® x908, x900 and x600 Series Switches
TM
AlliedWare Plus Operating System - Software Version 5.3.1 C613-50007-01 REV B