Show Ip Ospf Database Opaque-As - Allied Telesis SwitchBlade x908 Series Software Reference Manual

show ip ospf database opaque-as

Use this command to display information about the link-state type 11 LSAs. This type of link-
state denotes that the LSA is flooded throughout the Autonomous System (AS).
To modify the lines displayed, use the | (output modifier token) ; to save the output to a file,
use the > output redirection token.
Syntax
show ip ospf database opaque-as [<ip-address>]
Parameter
<advrouter>
adv-router
<ip-address>
self-originate
Exec mode and Privileged Exec mode
Mode
Figure 36-12: Example output from the
Output
self-originate
Examples
awplus#
awplus#
awplus#
C613-50007-01 REV B
[self-originate|<advrouter>]
Description
adv-router <ip-address>
Displays all the LSAs of the specified router.
A link state ID (as an IP address, entered in the format A.B.C.D.
Displays self-originated link states.
command
OSPF Router process 100 with ID (10.10.11.50)
AS-Global Opaque-LSA
LS age: 325
Options: 0x2 (*|-|-|-|-|-|E|-)
LS Type: AS-external Opaque-LSA
Link State ID: 11.10.9.23 (AS-external Opaque-Type/ID)
Opaque Type: 11
Opaque ID: 657687
Advertising Router: 10.10.11.50
LS Seq Number: 80000001
Checksum: 0xb018
Length: 25
show ip ospf database opaque-as 1.2.3.4 self-originate
show ip ospf database opaque-as self-originate
show ip ospf database opaque-as 1.2.3.4 adv-router 2.3.4.5
Software Reference for SwitchBlade® x908, x900 and x600 Series Switches
TM
AlliedWare Plus Operating System - Software Version 5.3.1
show ip ospf database opaque-as
OSPF Commands
36.67