Telnet - Allied Telesis SwitchBlade x908 Series Software Reference Manual

telnet

telnet Command
Use this command to open a telnet session to a remote device.
Syntax telnet {ip <ipv4-address>|ipv6 <ipv6-address>} [<port>]
Parameter
ip
<ipv4-address>
ipv6
<ipv6-address>
<port>
Exec mode and Privileged Exec mode
Mode
To connect to TCP port 2602 on the device at 10.2.2.2, use the command:
Examples
To connect to the telnet server host.example, use the command:
To connect to the telnet server host.example on TCP port 100, use the command:
To connect to the telnet server host.example with an IPv6 connection, use the command:
C613-50007-01 REV B
Modified vs_531 %flag
Description
Keyword used to specify the IPv4 address or host name of a remote
system.
Placeholder for an IPv4 address or host name for a remote system in
the format A.B.C.D, for example, 10.2.2.2
Keyword used to specify the IPv6 address of a remote system
Placeholder for an IPv6 address in the format x:x::x:x, for example,
2001:db8::8a2e:7334
Specify a TCP port number (well known ports are in the range 1-1023,
registered ports are 1024-49151, and private ports are 49152-65535).
awplus# telnet 10.2.2.2 2602
awplus# telnet host.example
awplus# telnet host.example 100
awplus# telnet ipv6 host.example
Software Reference for SwitchBlade® x908, x900 and x600 Series Switches
TM
AlliedWare Plus Operating System - Software Version 5.3.1
User Access Commands Updated telnet command for IPv6 addressing.
User Access Commands
5.13