BGP Commands
neighbor peer-group (creating a peer-group)
Use this command to create a peer-group.
Use the no parameter with this command to disable this function
Syntax
neighbor <tag> peer-group
no neighbor <tag> peer-group
Parameter
<tag>
Router mode and Address Family [ipv4 unicast | ipv4 multicast ] mode
Mode
Neighbors with the same update policies are grouped into peer groups. This facilitates the
Usage
updates of various policies, such as, distribute and filter lists. The peer-group is then configured
easily with any of the neighbor commands. Any changes made to the peer group affect all
members. Use this command to create a peer-group.
Example
awplus(config-router)#
38.76
Description
Name of the peer-group
awplus#
configure terminal
awplus(config)#
router bgp 10
neighbor group1 peer-group
Software Reference for SwitchBlade® x908, x900 and x600 Series Switches
TM
AlliedWare Plus
Operating System - Software Version 5.3.1
C613-50007-01 REV B