Debug Lacp - Allied Telesis SwitchBlade x908 Series Software Reference Manual

debug lacp

Use this command to enable all LACP troubleshooting functions.
Use the no parameter with this command to disable this function.
Syntax
debug lacp {all|cli|event|ha|packet|sync|timer[detail]}
no debug lacp {all|cli|event|ha|packet|sync|timer[detail]}
Parameter
all
cli
event
ha
packet
sync
timer
detail
Privileged Exec mode and Global Configuration mode
Mode
Examples
This command with the all parameter turns on complete LACP debug information.
Output
Figure 21-1: Example output after using the debug lacp all command
show debugging lacp
Related Commands
C613-50007-01 REV B
Description
Turn on all debugging for LACP.
Specifies debugging for CLI messages.
Echoes commands to the console.
Specifies debugging for LACP events.
Echoes events to the console.
Specifies debugging for HA (High Availability) events.
Echoes High Availability events to the console.
Specifies debugging for LACP packets.
Echoes packet contents to the console.
Specified debugging for LACP synchronization.
Echoes synchronization to the console.
Specifies debugging for LACP timer.
Echoes timer expiry to the console.
Optional parameter for LACP timer-detail.
Echoes timer start/stop details to the console.
awplus# debug lacp timer detail
awplus# debug lacp all
awplus#
awplus#
LACP debugging status:
LACP timer debugging is on
LACP timer-detail debugging is on
LACP cli debugging is on
LACP packet debugging is on
LACP event debugging is on
LACP sync debugging is on
Software Reference for SwitchBlade® x908, x900 and x600 Series Switches
TM
AlliedWare Plus Operating System - Software Version 5.3.1
debug lacp all
show debugging lacp
Link Aggregation Commands
21.5