Show Spanning-Tree Mst Config - Allied Telesis SwitchBlade x908 Series Software Reference Manual

Spanning Tree Commands

show spanning-tree mst config

Use this command to display MSTP configuration identifier for the device.
Syntax show spanning-tree mst config
Exec mode and Privileged Exec mode and Interface mode
Mode
The region name, the revision number, and the digest of the VLAN to MSTI configuration
Usage
table must be the same on all devices that are intended to be in the same MST region.
The following show output displays the MSTP configuration identifier.
Example
awplus#show spanning-tree mst config
%
% MSTP Configuration Information:
%------------------------------------------------------
% Format Id
% Name
% Revision Level : 0
% Digest
%------------------------------------------------------
instance vlan (MSTP)
Related Commands
region (MSTP)
revision (MSTP)
19.16
: 0
: My Name
: 0x80DEE46DA92A98CF21C603291B22880A
Software Reference for SwitchBlade® x908, x900 and x600 Series Switches
TM
AlliedWare Plus Operating System - Software Version 5.3.1 C613-50007-01 REV B