Show Mac Address-Table Thrash-Limit; Show Mirror - Allied Telesis SwitchBlade x908 Series Software Reference Manual

show mac address-table thrash-limit

Use this command to display the current thrash limit set for all interfaces on the device.
Syntax show mac address-table thrash-limit
Exec mode and Privileged Exec mode
Mode
To display the current, use the command:
Example
mac address-table thrash-limit
Related Commands

show mirror

Use this command to display the status of all mirrored ports.
Syntax
show mirror
Exec and Privileged Exec mode
Mode
To display the status of all mirrored ports, use the command:
Example
Figure 15-4: Example output from the
Output
C613-50007-01 REV B
awplus#
% Thrash-limit 7 movements per second
awplus#
Mirror Test Port Name: port1.1.1
Mirror option: Enabled
Mirror direction: both
Monitored Port Name: port1.1.2
Mirror Test Port Name: port1.1.3
Mirror option: Enabled
Mirror direction: receive
Monitored Port Name: port1.1.4
Mirror Test Port Name: port1.1.3
Mirror option: Enabled
Mirror direction: receive
Monitored Port Name: port1.1.1
Mirror Test Port Name: port1.1.1
Mirror option: Enabled
Mirror direction: receive
Monitored Port Name: port1.1.3
Mirror Test Port Name: port1.1.1
Mirror option: Enabled
Mirror direction: transmit
Monitored Port Name: port1.1.4
Software Reference for SwitchBlade® x908, x900 and x600 Series Switches
TM
AlliedWare Plus Operating System - Software Version 5.3.1
show mac address-table thrash-limit
show mirror
show mirror command
Switching Commands
15.29