Show Ip Ospf Database Network - Allied Telesis SwitchBlade x908 Series Software Reference Manual

OSPF Commands

show ip ospf database network

Use this command to display information about the network LSAs.
To modify the lines displayed, use the | (output modifier token) ; to save the output to a file,
use the > output redirection token.
Syntax
show ip ospf database network [<ip-address>]
Parameter
<advrouter>
adv-router
<ip-address>
self-originate
Exec mode and Privileged Exec mode
Mode
Figure 36-8: Example output from the
Output
command
36.62
[self-originate|<advrouter>]
Description
adv-router
Displays all the LSAs of the specified router.
A link state ID (as an IP address, entered in the format A.B.C.D.
Displays self-originated link states.
OSPF Router process 200 with ID (192.30.30.2)
Net Link States (Area 0.0.0.0)
LS age: 1387
Options: 0x2 (*|-|-|-|-|-|E|-)
LS Type: network-LSA
Link State ID: 192.10.10.9 (address of Designated Router)
Advertising Router: 192.30.30.3
LS Seq Number: 80000001
Checksum: 0xe1b0
Length: 32
Network Mask: /24
Attached Router: 192.20.20.1
Attached Router: 192.30.30.3
LS age: 1648
Options: 0x2 (*|-|-|-|-|-|E|-)
LS Type: network-LSA
Link State ID: 192.30.30.3 (address of Designated Router)
Advertising Router: 192.30.30.3
LS Seq Number: 8000000f
Checksum: 0xe864
Length: 32
Network Mask: /24
Attached Router: 192.30.30.2
Attached Router: 192.30.30.3
Software Reference for SwitchBlade® x908, x900 and x600 Series Switches
TM
AlliedWare Plus Operating System - Software Version 5.3.1
<ip-address>
show ip ospf database network <ip-address>
C613-50007-01 REV B