Show Startup-Config - Allied Telesis SwitchBlade x908 Series Software Reference Manual

File Management Commands

show startup-config

This command displays the contents of the start-up configuration file, which is the file that the
device runs on start-up.
For information on output options, see
Syntax
show startup-config
Privileged Exec mode
Mode
Figure 7-30: Example output from the show startup-config command
Output
!
service password-encryption
!
username manager privilege 15 password 8 $1$bJoVec4D$JwOJGPr7YqoExA0GVasdE0
!
platform jumboframe
platform routingratio ipv4only
!
service telnet
!
no clock timezone
ip domain-lookup
.
.
.
end
To display the contents of the current start-up configuration file, use the command:
Examples
boot config-file
Related Commands
copy running-config
copy startup-config
erase startup-config
show boot
7.44
awplus# show startup-config
Software Reference for SwitchBlade® x908, x900 and x600 Series Switches
TM
AlliedWare Plus Operating System - Software Version 5.3.1
"Controlling "show" command output" on page 1.30.
C613-50007-01 REV B