Show Running-Config Bgp - Allied Telesis SwitchBlade x908 Series Software Reference Manual

File Management Commands

show running-config bgp

show running-config bgp Command
Use this command to show the running system BGP related configuration.
For information on output options, see
Syntax show running-config bgp
Privileged Exec mode and Global Configuration mode
Mode
Example
Figure 7-9: Example output from the show running-config bgp command
Output
!
bgp config-type standard
bgp rfc1771-path-select
bgp rfc1771-strict
bgp aggregate-nexthop-check
!
router bgp 1
no auto-summary
no synchronization
bgp router-id 1.2.3.4
!
copy running-config
Related Commands
show running-config
7.28
New vs_531 %flag
awplus# show running-config bgp
Software Reference for SwitchBlade® x908, x900 and x600 Series Switches
TM
AlliedWare Plus Operating System - Software Version 5.3.1
File Management Commands Use this command to show the running system BGP related configuration.
"Controlling "show" command output" on page 1.30.
C613-50007-01 REV B